Operation Guide
OPERATION GUIDE
LEFT SWITCH
-
High/Low Beam Switch
Up position at , high beam on;
Down position at , low beam on. -
Winker button
Move to left, left turning light on;
Move to right, right turning light on. -
Horn button
Press, horn on;
Release, horn off.
SMART REMOTE CONTROLLER OPERATION
-
Headlamp button
Dial up to to turn on the headlamp.Turn downward to AUTO to automatically turn on the headlights.The headlights turn on automatically according to the brightness of the environment. Dail down to · to turn off the headlamp.
-
Parking button
Parking button has two modes: press to park the bike and parking indicator P goes on; and press again to exit the parking status.
-
Gear shift button
The bike has three modes, i.e., 1 "eco", 2 "cruise", and 3 "sport". Dial rightwards for "eco", middle for "normal"and left for "sport".
POWER
After unlocking the bike with the Smart Remote Controller, press the start button, and the bike will be in the "Powered" state; press it again to turn off the bike.
- Center Letter blinks;Protected
- Center Letter stays on;Standby
- Outer-ring light stays on;Power-on
REMOTE CONTROL
With the advanced Smart Remote Controller, you can easily lock or unlock your TC smart electric bike by simply pressing the button within 50 meters.
-
Lock button
When the bike is in the [Static State], press the lock button, and the start button flashes. The bike entersthe [Locked State].
-
Unlock button
Press the unlock button, and the start button stays on. The bike enters into the [Unlocked State].
HANDLEBAR LOCK
-
How to lock the bike
Motorcycle in parking position, turn handlebar to the extreme left position, put key in handlebar lock, and turn the key to right, motorcycle handlebar locked.
-
How to Unlock the bike
Put the key in handlebar lock, and turn the key to left, handlebar unlocked.
-
Open the storage box
Put key in, turn key to right, when hear sound "click", storage open.
-
Open the saddle
Put key in, turn key to left, seat open, under seat, there is tools with motorcycle.
OPEN THE STORAGE BOX AND SADDLE
KILL SWITCH
Kill switch, protection of power, when current over than the set range cause by abnormal situation or short circuit, kill switch will stop the connection with battery automatically, for safety reason.
TIPS:for your own safety, please put kill switch at "OFF" position:
A. before taking out battery pack;
B. before cleaning motorcycle;
C. long time storage the motorcycle.
OPERATION OF ADJUSTABLE PEDAL
Unique adjustable foot rest, offer 3 riding positions, adjustable according to rider’s request.
- Open seat, take out the inner hexagon spanner.
- Lose the bolt under the foot rest.
- Adjust the foot rest to suitable position, then fix the bolt.