Riding Guide

RIDING GUIDE

CHECKS BEFORE RIDING

Make sure to check the following items before riding a TC

  1. Whether the handlebar is stable and flexible when turning.
  2. Whether the switches on the right and left handlebars can work correct.
  3. Whether the throttle work correct.
    Make sure the tyre pressure is ok. The suggested tire pressure is 200Kpa for front wheel, 200Kpa for rear with rider only, 225Kpa for rear when 1 rider with 1 passenger.
  4. Check tyre surface, make sure no cracks, damage, and foreign matter puncture or attachment.
  5. Whether the tread depth is sufficient (>0.8 mm).
  6. Whether any error warning light on the instrument with power on.
  7. Whether the battery capacity is sufficient for your trip.
  8. Whether all light work correct.
  9. Whether the horn work correct.
  10. Whether the mirrors are clean. Adjust them to the appropriate angle.
  11. Whether the brake oil is sufficient, whether the brake lever and brake system work correct.
  12. For any questions, please contact SUPER SOCO Customer Service Center.

POWER ON

  1. Press "UNLOCK" on remote control, "POWER" continuously on.
  2. Put on helmet, riding TC, kick out side stand.
  3. Press "POWER", power on.
  4. Press "PARKING", parking light off, free motorcycle from parking.
  5. Turn throttle, motorcycle run.

TIPS:

Before riding, making sure side stand is kicked out, handlebar is unlocked.

DON’T press "PARKING" during riding, in case any danger due to power off in parking status.

DON’T put side stand at standing position, in case any danger due to power off in standing position.

Motorcycle can power on in steady standing position. In case any unusual situation, please move to side road, in case any dangerous.